Compuprint 6314 CDL Manual de usuario descargar pdf (Pagina 14)

CDL – Programmer Manual

An - XOR mode/transparent mode

When two objects are superimposed on the label, if the printer is in

XOR mode

the superimposed

part appears white, while if it is in

transparent mode

this part appears black. If

n=1

the printer is

set in

XOR mode

, if

n=2

transparent mode

When you want to obtain “reverse” text, you must use

XOR mode

Cnnnn – Horizontal offset (of columns)

When you want to move the whole label to the right (positive offset) without having to recalculate

all the column co-ordinates you can use the

Cnnnn

command in which

nnnn

are the four digits

indicating the column from which printing must begin.

e.g.

C0015

adds

to all the column co-ordinates and the labels appears transversally offset by 15

hundredths of an inch

to the right.

cnn – Cut command

Like the command

:nnnn

, here too

indicates the number of labels to be printed before the printer

automatically cuts the paper with the optional cutter (which must be enabled). Unlike

:nnnn

this

command accepts only two digits.

e.g. with

c02

the cutter operates every two labels that are printed.

Dhv – Dot size

The dots (the smallest points that the printer can print) can be “grouped” in couples to form a larger

dot. That is, you can enlarge each dot horizontally (h) and/or vertically (v) as in fig. 2.

Default setting.

After an

(see relevant paragraph), 15 tenths of a millimetre.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 52 53

Comentarios a estos manuales

Sin comentarios

Compuprint 6314 CDL Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Impresoras Compuprint 6314 CDL