Compuprint 6314 CDL Manual de usuario descargar pdf (Pagina 12)

CDL – Programmer Manual

STX Sn – Feed speed

The paper advance speed can be selected by pressing the FEED button. The

(from A to O)

corresponds to the following table:

n Speed (ips

)

A 2

B 2

C 2

D 2,5

E 3

F 3,5

H 4,5

I 5

J 5,5

L 6,5

M 7

N 7,5

e.g. After entering

STX SG

, the feed speed is 4 inches per second.

STX T – Print test

It prints a test label like the one printed by pressing the ON-LINE and FEED buttons when the

printer is switched on (for further information, see the user’s manual for the printer used) without

going into dump mode and without printing the configuration.

STX Unnss...s – Fill register

It fills register

(two-digit number) with the alphanumerical string

ss...s

(which must end with

). The string

ss...s

may differ in length from the one previously saved in register

STX Vn – Enable cutter and present sensor

According to the number given at

the cutter or the present sensor are enabled/disabled as in the

following table:

Inches per second.

Default and max. speed.

Default speed for models with expander card .

Max. speed for models with expander card .

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 52 53

Sin comentarios

Compuprint 6314 CDL Manual de usuario Pagina 12