Compuprint 4247-L03 Programmer Manua Manual de usuario Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 204
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
ESC [ p
1
'
Horizontal position absolute (HPA).
ASCII Code ESC [ p
1
'
Hexadecimal Value X'1B' X'5B' p
1
X'60'
Decimal Value 27 91 p
1
96
This command causes the print position to be moved to the decipoint location specified by p
1
. This
sequence can be used to print within the left, top, and bottom margins.
ESC [ p
1
a
Horizontal position relative (HPR).
ASCII Code ESC [ p
1
a
Hexadecimal Value X'1B' X'5B' p
1
X'61'
Decimal Value 27 91 p
1
97
This command moves the print position to the right, relative to the current position. The p
1
parameter
specifies the number of decipoints. This command cannot be used to move beyond the right margin.
ESC [ p
1
; p
2
s
Left/right margin set (SLR).
ASCII Code ESC [ p
1
; p
2
s
Hexadecimal Value X'1B' X'5B' p
1
X'3B' p
2
X'73'
Decimal Value 27 91 p
1
59 p
2
115
This command sets the left and right margin values. The p
1
parameter specifies the decipoint value of the
left margin. The p
2
parameter specifies the decipoint value of the right margin value. The default value for
the left margin is 0. The value for the right margin is the maximum width supported by the printer
configuration (that is 13.6*720=9792).
ESC [ p
1
j
Horizontal position backward (HPB).
ASCII Code ESC [ p
1
j
Hexadecimal Value X'1B' X'5B' p
1
X'6A'
Decimal Value 27 91 p
1
106
This command causes the current horizontal position to be moved backwards as specified by the p
1
parameter (decipoints).
HT
Horizontal tab.
ASCII Code HT
Hexadecimal Value X'09'
Decimal Value 9
This code causes the print head to be moved to the next tab stop.
Chapter 4. ANSI Emulation Commands 73
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 203 204

Comentarios a estos manuales

Sin comentarios