Compuprint 4247-L03 Programmer Manua Manual de usuario descargar pdf (Pagina 47)

ASCII Code ESC x n

Hexadecimal Value X'1B' X'78' n

Decimal Value 27 120 n

This command selects either LQ or Draft printing according to the following values:

n Selection

0 Draft printing

1 Letter Quality printing

If you select proportional spacing with the ESC p command during Draft printing, the printer prints an LQ

font instead. When you cancel proportional spacing with the ESC p command, the printer returns to Draft

printing.

Sets compressed printing. (EPSON)

ASCII Code SI

Hexadecimal Value X'0F'

Decimal Value 15

This command is accepted at any position within the line. DC2 code cancels compressed printing. The

setting of this command depends on the horizontal spacing previously set

10 CPI → 17 CPI

12 CPI → 20 CPI

Proportional → 1/2 width

DC2 code cancels compressed printing.

Sets double width printing (one line) (IBM/EPSON).

ASCII Code SO

Hexadecimal Value X'0E'

Decimal Value 14

This code causes subsequent data in the same line to be printed as double width characters. It is

cancelled by the CR, LF, VT, FF and DC4 codes or when the buffer is full.

Chapter 2. EPSON/IBM Mode 31

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 203 204

Sin comentarios

Compuprint 4247-L03 Programmer Manua Manual de usuario Pagina 47