Compuprint 4247-L03 Programmer Manua Manual de usuario descargar pdf (Pagina 49)

The total number of characters that will be printed from the table of all printable characters is equal to n

x 256). For example, to print 300 characters from the table of all printable characters: n

= 44, n

=1.

The control codes are not recognized as long as this sequence is active. The space character is printed as

an unassigned character.

ESC ^

Prints a single character from the all characters table. (IBM)

ASCII Code ESC ^ n

Hexadecimal Value X'1B' X'5E' n

Decimal Value 27 94 n

Range 0 ≤ n ≤ 255

This command prints the next character from the all characters table. This sequence prints only one

character from the all character table.

ESC 6

Selects the Character Set 2 (IBM).

ASCII Code ESC 6

Hexadecimal Value X'1B' X'36'

Decimal Value 27 54

This command selects the character set 2.

ESC 6

Enable Printable Code Area Expansion (EPSON).

ASCII Code ESC 6

Hexadecimal Value X'1B' X'36'

Decimal Value 27 54

ESC 7

Selects the Character Set 1 (IBM).

ASCII Code ESC 7

Hexadecimal Value X'1B' X'37'

Decimal Value 27 55

This command selects the character set 1.

ESC 7

Cancel Printable Code Area Expansion (EPSON)

ASCII Code ESC 7

Hexadecimal Value X'1B' X'37'

Decimal Value 27 55

Chapter 2. EPSON/IBM Mode 33

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 203 204

Sin comentarios

Compuprint 4247-L03 Programmer Manua Manual de usuario Pagina 49