Compuprint 9058 Programmer Manual Manual de usuario descargar pdf (Pagina 9)

EPSON/IBM Mode

A78408098-003

ESC 5

Sets an automatic line feed after a carriage return. (IBM)

ASCII Code ESC 5

Hexadecimal Value 1B 35

Decimal Value 27 53

If n is equal to 1, this command sets an automatic line feed on

receiving of a CR code. If n is equal to 0, this command cancels the

automatic line feed.

n Automatic line feed

0 Disabled

1 Enabled

ESC J

Advances paper n/180 inch. (EPSON)

ASCII Code ESC J

Hexadecimal Value 1B 4A

Decimal Value 27 74

Range 1 <

255

This is a terminator code; it therefore causes the current contents of

the print buffer to be printed out before performing a single line feed

of n/180 inch. This command is cancelled after the line feed has been

performed. The printing will restart after a line feed from the column

at which the command was sent.

Line Feed. (IBM, EPSON)

ASCII Code LF

Hexadecimal Value 0A

Decimal Value

This is a terminator code; it therefore causes the current contents of the

print buffer to be printed out before advancing the paper by one line at

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 142 143

Sin comentarios

Compuprint 9058 Programmer Manual Manual de usuario Pagina 9